CLEAN  >>  Products  >  Benchtops  >  CON500 Conductivity / TDS / Resistivity / Salinity / TEMP Meter
	CON500  Conductivity / TDS / Resistivity / Salinity / TEMP Meter   This meter provides reliable and accurate Conductivity, TDS, Resistivity, Salinity and Temperature measurements with 100*74mm large LCD, great 120 degree angle view.     ● 100*74mm large LCD, great 120 degree angle view. ● Multi parameters in one meter: Conductivity / TDS / Salinity / Resistivity / °C / °F. ● Resistivity constant calibration by standard solution. ● Conductivity electrode curve compensation function. ● Easy calibraton: 1 point automatic calibration or multi-point manual calibration. ● Built-in pure water conductivity compensation curve. ● HOLD function for easy viewing and recording. ● STABLE indicator prompts whenever reading stabilizes. ● Temperature offset adjusting function available. ● 100 data sets memory stores and recalls. ● Self-Diagnostic for easy troubleshooting (e.g. battery indicator, message codes). ● UPS, with built-in rechargable lithium battery (1300mAh).     Conductivity Range 0 - 5.000 µS/cm; 0 - 50.00 µS/cm; 0 - 500.0 µS/cm; 0 - 5000 µS/cm; 0 - 50.00 mS/cm Conductivity Resolution 0.001 µS/cm; 0.01 µS/cm; 0.1 µS/cm; 1 µS/cm; 0.01 mS/cm Conductivity Accuracy ±0.5% F.S. TDS Range 0 - 5.000 ppm; 0 - 50.00 ppm; 0 - 500.0 ppm; 0 - 5000 ppm; 0 - 50.00 ppt TDS Resolution 0.001 ppm; 0.01 ppm; 0.1 ppm; 1 ppm; 0.01 ppt TDS Accuracy ±1% F.S. Resistivity Range 0~100.0 MΩ*cm Resistivity Resolution 0.1 MΩ*cm Resistivity Accuracy ±1% F.S. Temperature Range -5.0 ~ +120 °C / 23.0 - 248.0 °F Temperature Resolution 0.1 °C / 0.1 °F Temperature Accuracy ±0.3 °C / ±0.5 °F Range Switching Auto / Manual Calibration 1 Point / Multi points Temperature Compensation Range -5.0 ~ +120.0 °C; Automatic ( ± 10 °C offset adjustment) / Manual Reference Tempereture 15 - 30 °C TDS Factor 0.40 - 1.00 Salinity Factor 0.65 Cell Constant 0.01,0.1,1,10 Tempereture Compensition Coefficient 0.00 - 9.99% Ultra pure Water Linear Compensation Yes Memory 100 sets Auto Power Off 10 mintues without key be pressed Power AC 100 - 240V adapter UPS Yes,with built-in rechargable lithium battery (1300mAh). Electrode Stand 300mm / Ø 6mm Electrode Holder 145mm - 220mm Dimensions 150*194*56mm (W*L*H) Weight 1.0 Kg Protection Grade IP 54		→  Benchtops   · PH500   · CON500   · DO500 100*74mm large LCD offers great 120 degree angle view ...   Ideal model you can count on everyday ...   Adjustable electrode bracket ready for your use ...   There are viewing of electrode efficiency on the big screen such ...

©2012 CLEAN Instruments - CISC. All Rights Reserved.