CON30 Tester
CLEAN CON30 Tester
Conductivity / TDS / Salinity TesterCON30 is the best value salt meter in your pocket, with 3 parameters (Conductivity / TDS / Salinity tester) in one and easy calibration. This dip-style tester is ideal for spot checking with greater flexibility.
●Waterproof, Dustproof Housing - IP67 rated.
●Broad measuring range: 0.0 S/cm -20.00mS/cm,from pure water to waste water applications.
●Large LCD with backlight.
●3 parameters in one meter, simple calibration.
●1*1.5 AAA long battery life.
●Self-Diagnostic for easy troubleshooting (e.g. battery indicator, message codes)
●Auto Lock Function
●Floats on water
●Broad measuring range: 0.0 S/cm -20.00mS/cm,from pure water to waste water applications.
●Large LCD with backlight.
●3 parameters in one meter, simple calibration.
●1*1.5 AAA long battery life.
●Self-Diagnostic for easy troubleshooting (e.g. battery indicator, message codes)
●Auto Lock Function
●Floats on water
 |
 |
 |
 |
| Pure water | Boiler water | Waste water | Lab |
| Range | 0.0 μS/cm (ppm) - 20.00 mS/cm (ppt) | |
| Resolution | 0.1 μS/cm (ppm) - 0.01 mS/cm (ppt) | |
| Accuracy | ±1% F.S. | |
| Temp. Range | 0 - 100.0 °C / 32 - 212 °F | |
| Working Temperature | 0 - 60.0 °C / 32 - 140 °F | |
| Temp. Compensation Range | 0.0 - 60.0 °C | |
| Temp. Compensation Type | Auto/Manual | |
| Solution Temp. Coefficient | 0.00 - 10.00% (default 2.00%) | |
| Reference Temp. | 15.0 - 30.0°C (default 25 °C) | |
| Calibration | Any 1 Point Calibration | |
| TDS Range(Coefficient:0.5) | 0.0 mg/L (ppm) - 20.00 g/L (ppt) | |
| TDS Coefficient | 0.40 - 1.00 Adjustable (Coefficient:0.5) | |
| Salinity Range | 0.0 mg/L (ppm) - 13.00 g/L (ppt) | |
| Salinity Coefficient | 0.65 | |
| Probe | CS3931 Graphite , K=1.0 | |
| Auto backlight off | 1 minute | |
| Auto power off | 20 minutes without key be pressed | |
| Power | 1x1.5V AAA battery | |
| Dimensions | (H×W×D) 185×40×48 mm | |
| Weight | 95g | |
| Protection | IP67 |
