An Ion Selective Electrode sensor specifically designed to measure Ammonia from 0.01 ppm to 17,000 ppm NH3 (5x10-7 M to 1M) concentrations.
Applications include, but not limited to: High Purity Power Station Water, Fish Tanks, Sea Water, Waste Water, Plating Baths, Biological Samples.
Applications include, but not limited to: High Purity Power Station Water, Fish Tanks, Sea Water, Waste Water, Plating Baths, Biological Samples.
Model
Specifications
| CS6212NH3 | CS6512NH3 | CS6712NH3 | Ammonia ( NH3 ) An Ion Selective Electrode sensor | |
| Lab | Process | Process | Slope | 56 ± 3 mV between 10-100 ppm @ 25°C |
| PG13.5 | NPT 3/4" | Reproducibility | ± 2% | |
 |
 |
 |
Interferences | Volatile amines |
| Tempe. Range | 0 to 50° C (if calibrated at that temp.) | |||
| Pressure Range | 0 to 10 psi | |||
| Response Time | 95% response in 30 seconds | |||
| Storage | Long term, store dry;Short term, store in ammonia standard with ISA added | |||
| Concentration Range | 0.01 ppm to 17,000 ppm (5 x 10-7 M to 1 M) |
|||
| pH Range | Above 11 pH | |||
| Resistance | 1000 to 1500 megaohms | |||
| Care, Maintenance & Cleaning | Treat with a dilute ammonia standard with pH adjusted > pH 11 Replace membrane as needed |
|||
| Isopotential Point | Unknown | |||
| On-Line Capability | Yes, pH control required | |||
| Applications | High Purity Power Station Waters, Fish Tanks, Sea Waters, Waste Waters, Plating Baths, Biological Samples | |||