Digital Chlorine Dioxide Sensor
Model
Specifications


Digital Free Chlorine Sensor

A580L Flow cell (optional accessory)
A580L Flow cell
This Flow cell is designed for the measurement of residual chlorine with a potentiostatic method, but can be used for other sensors and measures too. The cell's manufacturing characteristics allow the sample to run through the potentiostatic electrode site with a constant velocity. The in-flow can be regulated through a check valve.

CS6531D Digital Dissolved Ozone Sensor download

CS6530D Digital Dissolved Ozone Sensor
Order number CS6531D5T
Specification  
Principle Potentiostatic
Range 0 - 2.000 mg/L, 0 - 20.00 mg/L
Resolution 0.001 mg/L, 0.01 mg/L
Temperature range 0 - 70 °C
Pressure 0 -6 bar
Optimum Flow Rate 25-100 L/h
Shell material Glass+POM
Thread Cap PG13.5
Electrode dimensions   ø12x120mm
Cable length 5m
Connector Terminals
Output RS485 Modbus RTU
Power input DC 12V
IP rated

IP68

CS6731D Digital Chlorine Dioxide Sensor download

CS5530D Digital Free Chlorine Sensor
Order number CS6731D5T
Specification  
Principle Potentiostatic
Range 0.00mg/L~20.00 mg/L
Resolution 0.01 mg/L
Accuracy ±0.02 mg/L
Temperature range 0 - 70 °C
Pressure 0 -6 bar
Optimum Flow Rate 25-100 L/h
Shell material Glass+PP
Thread Cap 3/4″ NPT
Electrode dimensions   ø30x160mm
Cable length 5m
Connector Terminals
Output RS485 Modbus RTU
Power input DC 12V
IP rated

IP68

Site Meter